Llistar Títols
S'han trobat 343 ítems
Llistant ítems des de 200 a 225:
Format | Data | Títol | Autor |
---|
Format | Data | Títol | Autor |
|
11 juliol 2016 |
Improved delamination resistance of thin-ply based laminates: an experimental and numerical study |
Guillamet Busquets, Gerard
|
|
|
Improved delamination resistance of thin-ply based laminates: an experimental and numerical study |
Guillamet Busquets, Gerard
|
|
31 maig 2023 |
Incidence of the mechanisms of damage in the scale effect of composites involving Ultra Thin Plies |
París Carballo, Federico
|
|
31 maig 2023 |
Incidence of the mechanisms of damage in the scale effect of composites involving Ultra Thin Plies |
París, Federico
|
|
16 novembre 2017 |
Incremental sheet forming applied to the manufacturing of biocompatible polymer prostheses |
Bagudanch Frigolé, Isabel
|
|
31 maig 2023 |
Independent mesh method and RX-FEM modeling of 3d interlock woven composites with open hole |
Mollenhauer, David
|
|
31 maig 2023 |
Independent mesh method and RX-FEM modeling of 3d interlock woven composites with open hole |
Hoos, Kevin H.
; Zhou, Eric
; Iarve, Endel V.
; Popelar, Carl
; Riha, David
; Mollenhauer, David H.
|
|
|
Influence of pre-bond moisture in the adherents on the fracture toughness of bonded joints for composite repairs |
Budhe, Sandip Rudha
; Rodríguez Bellido, Ana Teresa
; Renart Canalias, Jordi
; Mayugo Majó, Joan Andreu
; Costa i Balanzat, Josep
|
|
març 2014 |
Influence of pre-bond moisture in the adherents on the fracture toughness of bonded joints for composite repairs |
Budhe, Sandip Rudha
; Rodríguez Bellido, Ana Teresa
; Renart Canalias, Jordi
; Mayugo Majó, Joan Andreu
; Costa i Balanzat, Josep
|
|
31 maig 2023 |
Influence of voids on thick DCB joint behavior |
Fan, Jialiang
|
|
27 juliol 2004 |
Influencia del proceso de reciclado sobre las propiedades de los materiales compuestos obtenidos por inyección de poliestireno reforzado con fibras lignocelulósicas |
López Sánchez, Ángel
|
|
27 juliol 2004 |
Influencia del proceso de reciclado sobre las propiedades de los materiales compuestos obtenidos por inyección de poliestireno reforzado con fibras lignocelulósicas |
López Sánchez, Ángel
|
|
|
Influencia del proceso de reciclado sobre las propiedades de los materiales compuestos obtenidos por inyección de poliestireno reforzado con fibras lignocelulósicas |
López Sánchez, Ángel
|
|
juliol 2024 |
Interlaminar fracture testing of multidirectional laminates: on finitewidth effect and residual stresses |
Garulli, Torquato
; Arteiro, Albertino
; Blanco Villaverde, Norbert
; Renart Canalias, Jordi
|
|
15 juliol 2015 |
Intermittency of turbulence in natural waters: patchiness in the thermocline of a lake under low winds and small-scale intermittency in the bottom boundary layer of a tidal flow |
Planella Morató, Jesús
|
|
|
Intermittency of turbulence in natural waters: patchiness in the thermocline of a lake under low winds and small-scale intermittency in the bottom boundary layer of a tidal flow |
Planella Morató, Jesús
|
|
15 juliol 2015 |
Intermittency of turbulence in natural waters: patchiness in the thermocline of a lake under low winds and small-scale intermittency in the bottom boundary layer of a tidal flow |
Planella Morató, Jesús
|
|
31 maig 2023 |
Investigating shear performance of PMCS |
Flores, Mark
|
|
31 maig 2023 |
Investigation of failure mechanisms in L-angle composite laminates |
Bushpalli, Sindhu
|
|
31 maig 2023 |
Investigation of thickness effects in bi-axially braided glass fibre laminates using a parametrised RVE model |
Luplow, Tim
|
|
31 maig 2023 |
Investigation of transverse matrix cracking in fatigue for laminated composites |
Patti, Stacy
|
|
19 desembre 2008 |
Large-Scale Surface registration |
Batlle Subirós, Elisabet
|
|
19 desembre 2008 |
Large-Scale Surface registration |
Batlle Subirós, Elisabet
|
|
|
Large-Scale Surface registration |
Batlle Subirós, Elisabet
|
|
31 maig 2023 |
Longitudinal tensile failure models: experimental validation, benchmarking and future directions |
Swolfs, Yentl
|